当前位置:首 页 --> 方案设计
BD57020MWV Qi无线充电参考设计
发布时间:2015/12/9 10:03:00 来源:
在线咨询:
给我发消息
李湘宁 2850985550
给我发消息
张代明 3003290139
给我发消息
姚红霞 3003214837
13713728695
Rohm公司的BD57020MW是无线电源发送器,包括了用于线圈驱动的逆变器,Qi兼容的通信控制器和解调电路,GPIO,TCXO缓冲器和I2C接口,支持Rohm BD57020MWV Qi无线充电(低功率和中功率),主要用于WPC兼容设备,PC和充电支架底座.本文介绍了BD57020MWV主要特性和指标,框图,典型应用电路图及材料清单与WPC Qi中功率充电参考设计电路图.
BD57020MWV is an integrated IC for the wireless powertransmitter. This device is composed of inverters for thecoil drive, controller for the communication of the Qicompliant and demodulating circuit, GPIO, TCXO buffer,and I2C interface.
BD57020MWV works as a controller in the wirelesspower transmitter based on the Qi compliant by using itwith a general-purpose microcomputer.
BD57020MWV is applied to Qi ver.1.2 (Low Power andMedium Power).

BD57020MWV主要特性:
WPC / Qi ver.1.2 (Low Power and Medium Power)support.
Half Bridge / Full Bridge inverter
Foreign object detection
GPIO 4CH
I2C bus interface
5.0mm x 5.0mm UQFN package 40 pin

BD57020MWV主要指标:
Input Power Supply Voltage Range: 4.2 V to 5.3 V
Input Adapter Voltage Range: 4.6 V to 20 V
Drive Frequency Range: 110kHz to 205kHz
Operating Temperature Range: -20℃ to +85℃

BD57020MWV应用:
WPC compliant devices
PC
Cradle for charge stand

图1.BD57020MWV框图

图2.BD57020MWV典型应用电路框图

图3.BD57020MWV典型应用电路图
BD57020MWV典型应用电路中材料清单(BOM):



BD57020MWV参考设计

A sample circuit design that has been tested and can be used by customers as a reference in their own designs.

图4.BD57020MWV参考设计外形图

图5.BD57020MWV WPC Qi中功率参考设计电路图
 
    您可能对以下产品感兴趣  
产品型号 功能介绍 兼容型号 封装形式 工作电压 备注
 
深圳市永阜康科技有限公司 粤ICP备17113496号 服务热线:0755-82863877 手机:13242913995