当前位置：首 页 --> 方案设计
Si705x低功耗高精度I2C温度传感器测量方案
发布时间：2015/1/29 9:41:00 来源：
Silabs公司的Si705x系列是低功耗高精度I2C数字温度传感器,具有能带隙温度传感器特性,集成了14位ADC,信号处理,校准数据和I2C接口,工作电压1.9V-3.6V,工作温度–40 到+125 ℃,精度从±0.3 ℃到±1.0 ℃,主要用在HVAC/R, 电热调节器,冷链存储,白色家当,计算机设备,手提消费类电子设备,资产跟踪等.本文介绍了Si705x系列主要特性,框图, 温度测量应用电路图,以及温度和湿度传感器评估板主要特性,电路图和PCB布局图.
The Si705x Digital Temperature Sensors offer industry-leading low power consumption and high accuracy across the entire operating voltage and temperature range. These monolithic CMOS ICs feature a band-gap temperature sensor element, an analog-to-digital converter with up to 14-bit resolution, signal processing, calibration data, and an I2C interface.
The patented use of novel signal processing and analog design enables the sensors to maintain their accuracy over a wide temperature and voltage range, while consuming very little current.
The temperature sensors are factory-calibrated and the calibration data is stored in the on-chip non-volatile memory. This ensures that the sensors are fully interchangeable, with no recalibration or software changes required.
The Si705x devices are available in a 3x3 mm DFN package, and the industry-standard I2C interface can operate at up to 400 kHz. Requiring just 195nA of average current when sampled once per second, the Si705x can operate for several years with just a single coin cell battery.
The Si705x devices offer an accurate, low-power, factory-calibrated digital solution ideal for measuring temperature in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms.
Si705x主要特性:
High Accuracy Temperature Sensors
Si7053: ±0.3 ℃ (max)
Si7054: ±0.4 ℃ (max)
Si7055: ±0.5 ℃ (max)
Si7050: ±1.0 ℃ (max)
Wide operating voltage (1.9 to 3.6 V)
–40 to +125 ℃ operating range
Accuracy maintained over the entire operating temperature and voltage range
Low Power Consumption
195 nA average current @ 1 Hz sample rate
14-bit resolution
Factory calibrated
I2C interface
3x3 mm DFN package
Si705x应用:
HVAC/R
Thermostats
White goods
Computer equipment
Portable consumer devices
Asset tracking
Cold chain storage
Battery protection
Industrial controls
Medical equipment
图1. Si705x框图
图2. Si705x温度测量应用电路图
温度测量应用电路图材料清单:
温度和湿度传感器评估板
The Si705x temperature sensor evaluation kits and accompanying graphical user interface software allow quick and easy access to the features and functions of the Si705x temperature sensor family while enabling the evaluation of the sensor’s performance. Four different kits are available, depending on the accuracy desired. All of the supported evaluation kits contain the following items:
Si7013USB-DONGLE evaluation board consisting of one Si7013 sensor as well as USB interface and circuitry for evaluation of the Si7013 with thermistor or other analog input
3-foot flat cable to connect the “postage stamp” boards to the USB dongle USB extender cable
Windows graphical user interface software for complete control of the Si70xx sensors (Windows XP, VISTA, or 7 required)Depending on the kit, different postage stamp boards are supplied as well.
The Si7013USB-Dongle kit has Si7013,Si7020 and Si7021 I2C postage stamp boards.
The Si7022-23-EVB kit contains Si7022 and Si7023 PWM output boards.
The Si7006-07-EVB kit contains Si7006 and Si7007 low-cost postage stamp boards.
The Si7050/3/4/5-EVB kits contain the appropriate Si7050, Si7053, Si7054 or Si7055 temperature sensor postage stamp.
Using the Si7013 USB-dongle, the Windows GUI will also support “postage stamp” size boards for the Si7005 first-generation temperature and humidity sensor in a 4x4 mm package (Si7005-EB) as well as the Si7015 pin-compatible upgrade of this part (Si7015-EB).
The Windows* GUI will also support the older version Si7005USB-dongle although not all features of the newer parts can be evaluated in this case.
图3. Si7013USB-DONGLE外形图
温度和湿度传感器评估板包括:
USB dongle control board
Si7050-EB, Si7053-EB, Si7054-EB or Si7055-EB "postage stamp" daughter board
3 ft. flat ribbon cable
USB extension cable
图4. Si7006, Si7007, Si7013, Si7020/21, Si7022/23和Si705x评估板外形图
图5. USB-DONGLE电路图
图6.Si7013 Dongle板顶层布局图
图7.Si7013 Dongle板底层布局图
图8.Si7013 EB电路图
图9.Si7006, Si7020/21或 Si7050/3/4/5 EB电路图
图10.Si7005/15 EB电路图
图11.Si7007, Si7022和Si7023 EB电路图
The Si705x Digital Temperature Sensors offer industry-leading low power consumption and high accuracy across the entire operating voltage and temperature range. These monolithic CMOS ICs feature a band-gap temperature sensor element, an analog-to-digital converter with up to 14-bit resolution, signal processing, calibration data, and an I2C interface.
The patented use of novel signal processing and analog design enables the sensors to maintain their accuracy over a wide temperature and voltage range, while consuming very little current.
The temperature sensors are factory-calibrated and the calibration data is stored in the on-chip non-volatile memory. This ensures that the sensors are fully interchangeable, with no recalibration or software changes required.
The Si705x devices are available in a 3x3 mm DFN package, and the industry-standard I2C interface can operate at up to 400 kHz. Requiring just 195nA of average current when sampled once per second, the Si705x can operate for several years with just a single coin cell battery.
The Si705x devices offer an accurate, low-power, factory-calibrated digital solution ideal for measuring temperature in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms.
Si705x主要特性:
High Accuracy Temperature Sensors
Si7053: ±0.3 ℃ (max)
Si7054: ±0.4 ℃ (max)
Si7055: ±0.5 ℃ (max)
Si7050: ±1.0 ℃ (max)
Wide operating voltage (1.9 to 3.6 V)
–40 to +125 ℃ operating range
Accuracy maintained over the entire operating temperature and voltage range
Low Power Consumption
195 nA average current @ 1 Hz sample rate
14-bit resolution
Factory calibrated
I2C interface
3x3 mm DFN package
Si705x应用:
HVAC/R
Thermostats
White goods
Computer equipment
Portable consumer devices
Asset tracking
Cold chain storage
Battery protection
Industrial controls
Medical equipment
图1. Si705x框图
图2. Si705x温度测量应用电路图
温度测量应用电路图材料清单:
温度和湿度传感器评估板
The Si705x temperature sensor evaluation kits and accompanying graphical user interface software allow quick and easy access to the features and functions of the Si705x temperature sensor family while enabling the evaluation of the sensor’s performance. Four different kits are available, depending on the accuracy desired. All of the supported evaluation kits contain the following items:
Si7013USB-DONGLE evaluation board consisting of one Si7013 sensor as well as USB interface and circuitry for evaluation of the Si7013 with thermistor or other analog input
3-foot flat cable to connect the “postage stamp” boards to the USB dongle USB extender cable
Windows graphical user interface software for complete control of the Si70xx sensors (Windows XP, VISTA, or 7 required)Depending on the kit, different postage stamp boards are supplied as well.
The Si7013USB-Dongle kit has Si7013,Si7020 and Si7021 I2C postage stamp boards.
The Si7022-23-EVB kit contains Si7022 and Si7023 PWM output boards.
The Si7006-07-EVB kit contains Si7006 and Si7007 low-cost postage stamp boards.
The Si7050/3/4/5-EVB kits contain the appropriate Si7050, Si7053, Si7054 or Si7055 temperature sensor postage stamp.
Using the Si7013 USB-dongle, the Windows GUI will also support “postage stamp” size boards for the Si7005 first-generation temperature and humidity sensor in a 4x4 mm package (Si7005-EB) as well as the Si7015 pin-compatible upgrade of this part (Si7015-EB).
The Windows* GUI will also support the older version Si7005USB-dongle although not all features of the newer parts can be evaluated in this case.
图3. Si7013USB-DONGLE外形图
温度和湿度传感器评估板包括:
USB dongle control board
Si7050-EB, Si7053-EB, Si7054-EB or Si7055-EB "postage stamp" daughter board
3 ft. flat ribbon cable
USB extension cable
图4. Si7006, Si7007, Si7013, Si7020/21, Si7022/23和Si705x评估板外形图
图5. USB-DONGLE电路图
图6.Si7013 Dongle板顶层布局图
图7.Si7013 Dongle板底层布局图
图8.Si7013 EB电路图
图9.Si7006, Si7020/21或 Si7050/3/4/5 EB电路图
图10.Si7005/15 EB电路图
图11.Si7007, Si7022和Si7023 EB电路图
|
||||||
 |
||||||
|
||||||
