ST公司的STM32W108xx系列是全集成系统级芯片(SoC),集成了2.4 GHz, IEEE 802.15.4兼容收发器, 32－bit ARM® Cortex™-M3微处理器,闪存和RAM以及用来设计基于802.15.4系统的外设.主要用在智慧能源,建筑物自动化和控制,家庭自动化和控制,安全和监测, ZigBee® Pro无线传感器网络以及RF4CE产品和遥控.本文介绍了STM32W108主要特性和框图, 入门板STM32W-SK和扩展板STM32W-EXT主要特性,电路图和材料清单.

The STM32W108 is a fully integrated System-on-Chip that integrates a 2.4 GHz, IEEE 802.15.4-compliant transceiver, 32-bit ARM® Cortex™-M3 microprocessor, Flash and RAM memory, and peripherals of use to designers of 802.15.4-based systems.

The transceiver utilizes an efficient architecture that exceeds the dynamic range requirements imposed by the IEEE 802.15.4-2003 standard by over 15 dB. The integrated receive channel filtering allows for robust co-existence with other communication standards in the 2.4 GHz spectrum, such as IEEE 802.11 and Bluetooth. The integrated regulator, VCO, loop filter, and power amplifier keep the external component count low. An optional high performance radio mode (boost mode) is software-selectable to boost dynamic range.

The integrated 32-bit ARM® Cortex™-M3 microprocessor is highly optimized for high performance, low power consumption, and efficient memory utilization. Including an integrated MPU, it supports two different modes of operation: Privileged mode and Unprivileged mode. This architecture could be used to separate the networking stack from the application code and prevent unwanted modification of restricted areas of memory and registers resulting in increased stability and reliability of deployed solutions.

The STM32W108 has 128/192/256 Kbytes of embedded Flash memory and 8/12/16 Kbytes of integrated RAM for data and program storage. The STM32W108 HAL software employs an effective wear-leveling algorithm that optimizes the lifetime of the embedded Flash.

To maintain the strict timing requirements imposed by the ZigBee and IEEE 802.15.4-2003 standards, the STM32W108 integrates a number of MAC functions into the hardware. The MAC hardware handles automatic ACK transmission and reception, automatic backoff delay, and clear channel assessment for transmission, as well as automatic filtering of received packets. A packet trace interface is also integrated with the MAC, allowing complete, non-intrusive capture of all packets to and from the STM32W108.

The STM32W108 offers a number of advanced power management features that enable long battery life. A high-frequency internal RC oscillator allows the processor core to begin code execution quickly upon waking. Various deep sleep modes are available with less than 1 μA power consumption while retaining RAM contents. To support user-defined applications, on-chip peripherals include UART, SPI, I2C, ADC and general-purpose timers, as well as up to 24 GPIOs. Additionally, an integrated voltage regulator, power-on-reset circuit, and sleep timer are available.

STM32W108主要特性:

Complete system-on-chip
– 32-bit ARM® Cortex™-M3 processor
– 2.4 GHz IEEE 802.15.4 transceiver & lower MAC
– 128/192/256-Kbyte Flash, 8/12/16-Kbyte RAM memory
– AES128 encryption accelerator
– Flexible ADC, SPI/UART/I2C serial communications, and general-purpose timers
– 24 highly configurable GPIOs with Schmitt trigger inputs
Industry-leading ARM® Cortex™-M3 processor
– Leading 32-bit processing performance
– Highly efficient Thumb®-2 instruction set
– Operation at 6, 12 or 24 MHz
– Flexible nested vectored interrupt controller
Low power consumption, advanced management
– Receive current (w/ CPU): 27 mA
– Transmit current (w/ CPU, +3 dBm TX): 31 mA
– Low deep sleep current, with retained RAM and GPIO: 400 nA/800 nA with/without sleep timer
– Low-frequency internal RC oscillator for low-power sleep timing
– High-frequency internal RC oscillator for fast (100 μs) processor start-up from sleep
Exceptional RF performance
– Normal mode link budget up to 102 dB; configurable up to 107 dB
– -99 dBm normal RX sensitivity; configurable to -100 dBm (1% PER, 20 byte packet)
– +3 dB normal mode output power; configurable up to +8 dBm
– Robust WiFi and Bluetooth coexistence
Innovative network and processor debug
– Non-intrusive hardware packet trace
– Serial wire/JTAG interface
– Standard ARM debug capabilities: Flash patch & breakpoint; data watchpoint & trace; instrumentation trace macrocell
Application flexibility
– Single voltage operation: 2.1-3.6 V with internal 1.8 V and 1.25 V regulators
– Optional 32.768 kHz crystal for higher timer accuracy
– Low external component count with single 24 MHz crystal
– Support for external power amplifier
– Small 7x7 mm 48-pin VFQFPN package or 6x6 mm 40-pin VFQFPN package

STM32W108应用:

Smart energy
Building automation and control
Home automation and control
Security and monitoring
ZigBee® Pro wireless sensor networking
RF4CE products and remote controls


图1.STM32W108 方框图

入门板STM32W-SK和扩展板STM32W-EXT

STM32W-SK and STM32W-EXT starter and extension kits for STM32W108xx microcontrollers
The STM32W-SK and STM32W-EXT starter and extension kits are easy to use tools for the STM32W108xx microcontrollers. This family of microcontrollers integrates a 32-bit ARM® Cortex™-M3 microprocessor and a 2.4 GHz, IEEE 802.15.4-compliant transceiver. The kits demonstrate how effectively the STM32W108xx can be used in real IEEE 802.15.4 applications. They are suitable for different types of wireless network scenarios such as:

● Remote control and target networks (based on the ZigBee RF4CE protocol stack) used for driving consumer devices such as TVs, set-top boxes, etc.

● Point to point networks (based on a Simplified MAC library) used to address a basic IEEE 802.15.4 communication. This configuration enables customers to develop any protocol stack of their choice.

The STM32W108xx kits provide demonstration applications and documentation which serve as a reference for creating your own applications and re-programming the STM32W108xx microcontroller. You can run the STM32W108xx kits in several ways (remote control/target and point-to-point applications), using the dedicated software libraries (ZigBee RF4CE, and Simplified MAC), as well as a third-party IDE and C compiler (IAR).

Moreover, the STM32W108xx kits provide a set of APIs which allow you to use the kit platform capabilities such as LEDs and serial communication channels (virtual COM through USB).

The STM32W108xx starter kit package (STM32W108B-SK) contains the following hardware components:

● Two STM32W108 application boards (MB851)
● One STM32W108 extension board (MB850)
● One Raisonance STM32-Primer2 tool (STM3210E-PRIMER)
● One J-Link Lite JTAG Flash programmer and debugger
● One mini USB cable
● Four AAA batteries


图2.MB851应用板                            带功放的MB954应用板

图3.MB850 rev. A电路图

图4.MB851模块电路图

图5.MB851 rev. A电路图

图6.MB851 rev. B电路图

图7.MB851 rev. C电路图

图8.MB851 rev. D电路图

图9.MB854 模块电路图

图10.MB854 rev. A电路图

图11.MB954 rev .B电路图

图12.MB954 rev. C电路图

图13.MB951 rev. B电路图